| GLASS TUBE ROTAMETER (RSA 3006) |
| Rotameter are designed for the accurate measurement of rate of flow for liquids and gases. The rotameter is mounted on vertically. A complete rotameter installation consists of tapered glass tube and shielded from all the sided with clearfront visibility. Inside the tubes, the float provides indication of flow rate. |
| FEATURES:- |
| 1. |
Over all face to face length 500mm for flanged connection. |
 |
| 2. |
Easily interchangeability of tubes without disconnection from the lines. |
| 3. |
Scale Length 180-210mm. |
| 4. |
Body M.S.powder coated or SS on request. |
| 5. |
Cover M.S.powder coated. |
| 6. |
Accuracy ± 2% of FSD |
| 7. |
Detachable scale with flow rate. |
| 8. |
End connection rotatable through 360°. |
| 9. |
Connection - Flanged & Screwed end. |
| 10. |
Cover glass protected with rubber. |
| 11. |
Gland Bolt : SS 304 Strictly |
| 12. |
Packing : pure teflon. |
|
| |
| Material of construction available |
Specification Datas Requires For Offer |
| Metering tube |
: |
Borosilicate glass tapered. |
Flow range available |
: |
25 - 30000 LPH of water & 0.1 - 300 nm³ /hr of air at NTP. |
| |
| Floats |
: |
SS-0316 / 304 / MS. / S.S. / PP. / Pure Teflon. |
| End Connection |
: |
SS-316 / 304 / MS. / S.S. / P.P. / Pure Teflon Lined. |
| Packing |
: |
Pure teflon + neoprene & silicon on request |
| Gland |
: |
C.S. Epoxy Coated / SS on request |
| Body |
: |
M.S. Powder coated / SS on request |
|
| 1 |
: |
Named of fluid (service). |
| 2 |
: |
Density / Specific gravity. |
| 3 |
: |
Flowrange. |
| 4 |
: |
Scale marking in LPH / LPM /kg/hr/USGPM. |
|
OPERATING PRESSURE : Min - Max - Working. |
|
OPERATING TEMPERATURE : Min -- Max. - Working. |
|
|
| Material of wetted parts : |
| LINE SIZE : Flanged / Screw. |
SIDE - SIDE: Top & Bottom. |
| ORIENTATION : Vertical - top bottom. |
INLET- side & OUTLET- vertical vice versa. |
|
| Note : Prevents of glass tube breaking to always open outlet valve & gradually operates inlet valves sizes available from 15 nb to 100 nb pipe size. Flow Ranges available from 25 LPH to 30000 LPH of water & 0.1 to 300nm³/hr Air at NTP. |
| |
| PURGE ROTAMETER (LOW FLOW RATE) (RSA 3240) |
| Suitable for measurement of low flow rate of liquid / gases. The standard mounting is 1/4" BSP rear and several arrangements of flanged or hose nipple connection can be offered on request. |
 |
| Ranges Available |
| For water |
: |
500 cc | min to 10 LPM. |
| For Air |
: |
100cc | min to 1000 LPM at NTP. |
| Feature |
: |
Glass tube & acrylic body available. |
| Regulator Valve |
: |
Needle valve for controlling of flow
at inlet & easily to panel Mounting. |
|
|